User:Speedy: Difference between revisions

Latest revision as of 20:23, 30 May 2024

Inline skating aficionado

22:02.2024: This page is currently outdated for 2024. I have acquired many more frames and boots and do not have enough time to keep updating pages with information about it.

About me

General Toronto Bladers and Toronto Meetup Rollerblading organizer
Wiki documentations
Skate marshal
Toronto Roll 2023 Skate Marshall
Location: Southwest Toronto and where the wheels take me.

My Gear

2023 Seba KSJ Bullet Edition
2022 May 18th, I bought the Seba Marathon carbon boots
2021 I bought the Adapt GTO again (Full review is to be posted online about this overpriced, overrated and hyped skate)
2020 bought the Seba Igor S carbon, which has a flat frame, carbon cuff, and tri-skate 3 x 100 mm wheels.
2019, regrettably I bought the Adapt GTO skates (they were returned due to their condition, and I was only refunded after many requests)
05/18/2017 bought the Seba Hight Light carbon with a flat frame, plastic cuff and 80 mm wheels
In 2011, I bought a pair of K2 with 84 mm wheels and took up inline skating more seriously at a fitness and recreational level. I have been skating regularly ever since.
In 2003, I bought a pair of Mongoose soft boot inline skates for $99 CAD at Walmart. (Looking back, they were horrible. There's a video of this.)
At 12, I turned to street skating and skateboarding for the next four years
First skates when I was 7 or 8 years old. They were adjustable quads. I never gravitated much to them.

Equipment used

My experience with the following equipment is:

Boots

In the past, I used weird boots. I tried one pair of hard-shell plastic boots and did not like it. Currently, Seba carbon boots only.

Two pairs of Adapt skaters conclude that Adapt is hype. Most uncomfortable boots ever used and poor craftsman work when compared to Seba. I did not pay the total price for them, nor should anyone, as the carbon boot makes them worth less than $500 CAD.

Wheels used

I have tried many wheels over the years. Below are some honourable mentions. The best wheels I have found are purposely not listed here.

By order of performance and preference being one the best:

80/100/110 mm / xfirm wheels from a brand that currently I am not listing here.
Bont Avenger
MPC Black Magic 100~110 mm / xfirm
UnderCover Bullet 88a
Matter F3 / 100mm (unsure if it is original)
Gyro FSK 80 mm

Other past options:

Overall Seba 80 mm / 85a.
Seba Luminous Glow
Seba Luminous 85a
Seba White 84 mm / 84a
Seba Street invaders 80 mm / 84a and Seba Slide Puyee florescent 80 mm / 90a
Seba Hyper G concrete 80 mm / 85a
China LED luminous 80/100 mm 90a (which in reality are more like 82/83a due to the polyurethane quality)
K2 performance 80 mm / 82a
K2 active 80 mm / 80a

Bearings used

Fastest tested bearings so far are the Swiss ceramics and Twincam ILQ-X mr2.

By order of performance and preference being one the best:

Twincam 608 ILQ-X mr2 (RS), Cats 608 Red (RS) and Swiss 608 ceramics (hybrid) (RS)
Cats Lion Bearings
Swiss Hybrid Ceramics
Twincam 608 ILQ9 Pro (RS) and Twincam 608 ILQ11 SCRS
Wicked 608 ABEC9 (RS)
Wicked 608 ABEC7 (RS)

Some that I have used but will gladly pass:

Twincam 608 ILQ7 classic (ZZ)
K2 608 ILQ5 (ZZ)
Mongoose 608 ABEC5 (ZZ)
K2 608 ILQ5 (ZZ)

Frames used

Below only Seba equipment is stated at the moment

SEBA Deluxe

Seba Deluxe (v1 and v2) Black Frames Flat 165/180/195 mount is considered one of the best frames on the market. It is stiffer and lighter and guarantees superior control, comfort, and outstanding power transfer. It is excellent for most demanding skating styles.

The secret of the Deluxe frame is the tubular cross-braces. Cross braces are typically the weakest point in a frame, and the demands of slalom and freestyle skating can often lead them to crack. In the Deluxe frame, the cross braces have a hole drilled down the length to turn them into tubes after extrusion. These tubes are much stronger than the standard cross brace, providing the frame with excellent stiffness and durability. The short lengths are ideal for slalom, freestyle and dance skating disciplines.

Used sizes:

273mm (90mm wheels), 243mm (80mm wheels)
Mounting distances: 165mm, 180mm, and 195mm
Weights: 190g / 6.06oz – one 243mm frame, no axles
Aluminum 6000 series frame, CNC machined

FR 300

The 300 Frame from FR is in the well-known design from Seba. With its length of 232 mm, it offers good agility. It is milled out of a 7005 aluminum block and provides a stylish look with its cutouts. Its hardness makes it highly torsion-resistant and ensures optimum power transmission.

Used wheel size = 100mm
length = 232mm
Mounting = 150mm, 165mm and 180mm
Aluminum 7000 series frame, CNC machined

Endless

I bought the endless frame 4x 100mm / 3 x 110mm during 2021.

It is a frame designed for beginners and intermediate skaters and not advanced skaters
Although the lightest of its kind for wizard skating, it is still one of the heaviest of all frames out there, and on speed skating and marathons, its weight is felt as performance decreases.
Not aerodynamic design harms its performance for speed and long distance, which is heavily felt during windy days.
Axle holes are both from the right side due to identical frames. You must remove the right boot to change the wheels on the go.

Powerslide

During 2021 i bought the powerslide v-type II frame. This frame allows the same setup as an endless frame without the extra downsides, as mentioned about the endless. However, it is not rockered.

Setups: 4x100mm or 3x110mm

Skill level

At Inline/quad/ice skating? (eg. Beginner, Intermediate, Advanced)

Aggressive: (not practiced)
Intermediate: Slalom

Quad skating: (not practiced)
Ice skating: Intermediate (not longer practiced)

Speed skating: Advanced
Marathon: Advanced

Skating style

Long distance, speed, endurance, skating form, basic tricks, urban skating, city skating, speed human mosquito swatter.

Environment

Preferred inline skating environment by order of preference:

Long asphalt trails in the middle of the woods
Hockey concrete rinks
Empty skate parks

Apps used

Hauk for live gps tracking
Opentracks for gps recording

Recommended skaters

Although I subscribe to over 100 youtube channels, my recommendations go to:

Favorite skater:

iGOR Cheremetieff Slalom

For form, technique and performance:

Joey Mantia 2 Time Olympian, World Champion speed skater
Viktor Thorup 2018 Olympian. Professional inline & Long track speed skater
Pascal Briand Speed skating champion

Group skating:

Fabien Caron Freestyle
Blade in New York Group skating
Ktextreme Radical skating

Flow Skate:

Nicola Torelli Freestyle/City skate flow skate
Shawn Unwin Freestyle/City skate flow skate

Reviews:

Nazar On Wheels Tech reviews (the guy is an engineer, and he has skated with us in Toronto)

Disapproved skaters

That narcissistic, arrogant one from YouTube who sold out and has a skating style comparable to a trucker's mouth when a trucker speaks. Who also influences people in a bad and inadequate way with idiocies to get a few more views.
Anyone else who uses skating as a platform to bring identity politics and activism into the sport.

Links

@@ Line 1: / Line 1: @@
 [[File:speedy_06.05.2022.jpg|300px|thumb|right|[[Speedy]] 06.05.2022]]
 Inline skating aficionado
+:02.2024:
+This page is currently outdated for 2024. I have acquired many more frames and boots and do not have enough time to keep updating pages with information about it.
 == About me ==
-* General organizer
+* General [[Toronto Bladers]]  and Toronto Meetup Rollerblading organizer
 * Wiki documentations
 * [[Skate marshals|Skate marshal]]
-* '''Location''': South west Toronto
+* [[Toronto Roll]] 2023 Skate Marshall
+* '''Location''': Southwest Toronto and where the wheels take me.
 == My Gear ==
 [[File:seba_laces.jpg|300px|thumb|right|[[Seba]] waxed laces (limited edition)]]
-[[File:seba_igor_s_slide-slalom_setup.jpg|300px|thumb|right|[[Seba]] Igor S slide carbon with seba plus rockered slalom frame for 2023]]
+[[File:seba_igor_s_slide-slalom_setup.jpg|300px|thumb|right|[[Seba]] Igor S slide carbon with Seba plus rockered slalom frame for 2023]]
 [[File:seba_trix2-low_cuff-marathon-boots.jpg|300px|thumb|right|18/05/2022 I bought the Seba trix2 low cuff marathon carbon boots for $600 cad]]
@@ Line 20: / Line 24: @@
 [[File:seba_igor_plus-boot.jpg|300px|thumb|right|[[Seba]] Igor Plus S carbon boot with carbon cuff for $800 cad in 2020]]
-[[File:seba_igor_plus-boot-triskate.jpg|300px|thumb|right|[[Seba]] Igor Plus S carbon boot with carbon cuff for $800 cad in 2020]]
+[[File:seba_igor_plus-boot-triskate.jpg|300px|thumb|right|[[Seba]] Igor Plus S carbon boot with carbon cuff for CAD 800 in 2020]]
-[[File:seba_high_light_carbon_skate.jpg|300px|thumb|right|[[Seba]] high light carbon skate with plastic cuff for $800 cad in 2017]]
+[[File:seba_high_light_carbon_skate.jpg|300px|thumb|right|[[Seba]] high light carbon skate with a plastic cuff for $800 cad in 2017]]
-[[File:Bauer_vapor-X-edge.jpg|300px|thumb|right|[[Bauer]] Vapor X:Edge Hockey Skates, Senior]]
+[[File:Bauer_vapor-X-edge.jpg|300px|thumb|right|[[Bauer]] Vapor X: Edge Hockey Skates, Senior]]
 [[File:adapt_gto_hyperskate-2018.jpg|300px|thumb|right| 2019, '''regrettably''' [https://youtube.com/watch?v=Gejk5cKIlBA (video) I bought the Adapt GTO skates for $1300 cad] (they were returned due to their condition and I was only refunded after many requests) ]]
@@ Line 36: / Line 40: @@
 [[File:seba_backpack_setup.jpg|300px|thumb|right|[[Seba]] backpack for $130 in 2017. My setup at the time]]
-* 2022 May 18th I bought the seba marathon carbon boots
+* 2023 [https://www.youtube.com/watch?v=mqrGfgvvV_Y Seba KSJ Bullet Edition]
-* 2021 I bought the [[Adapt]] GTO again ('''Full review is to be posted online about this over priced, overrated and hyped skate''')
+* 2022 May 18th, I bought the Seba Marathon carbon boots
-* 2020 bought the [[Seba]] Igor S carbon with a flat frame, carbon cuff and tri-skate 3 x 100 mm wheels.
+* 2021 I bought the [[Adapt]] GTO again ('''Full review is to be posted online about this overpriced, overrated and hyped skate''')
-* 2019, '''regrettably''' [https://youtube.com/watch?v=Gejk5cKIlBA I bought the [[Adapt]] GTO skates] (they were returned due to their condition and I was only refunded after many requests)
+* 2020 bought the [[Seba]] Igor S carbon, which has a flat frame, carbon cuff, and tri-skate 3 x 100 mm wheels.
+* 2019, '''regrettably''' [https://youtube.com/watch?v=Gejk5cKIlBA I bought the [[Adapt]] GTO skates] (they were returned due to their condition, and I was only refunded after many requests)
 * 05/18/2017 bought the [[Seba]] Hight Light carbon with a flat frame, plastic cuff and 80 mm wheels
-* 2011, I bought a pair of K2 with 84 mm wheels and picked up [[inline skating]] more seriously at a fitness and recreational level and skating on a regular basis ever since.
+* In 2011, I bought a pair of K2 with 84 mm wheels and took up [[inline skating]] more seriously at a fitness and recreational level. I have been skating regularly ever since.
-* In 2003, I bought a pair of mongoose soft boot inline skates for $99 Cad on Walmart. (Looking back, they were horrible. There's video of this)
+* In 2003, I bought a pair of Mongoose soft boot inline skates for $99 CAD at Walmart. (Looking back, they were horrible. There's a video of this.)
-* At 12, I turned to street skating skateboarding for the next 4 years
+* At 12, I turned to street skating and skateboarding for the next four years
 * First skates when I was 7 or 8 years old. They were adjustable quads. I never gravitated much to them.
@@ Line 50: / Line 55: @@
 === Boots ===
-In the past I used weird boots. Tried one pair of hard shell plastic boots and did not liked it. Currently [[Seba]] carbon boots only.
+In the past, I used weird boots. I tried one pair of hard-shell plastic boots and did not like it. Currently, [[Seba]] carbon boots only.
-Two pairs of [[Adapt]] skaters to conclude that [[Adapt]] is hype. Most uncomfortable boots ever used and poor craftsman work when compared to [[Seba]].
+Two pairs of [[Adapt]] skaters conclude that [[Adapt]] is hype. Most uncomfortable boots ever used and poor craftsman work when compared to [[Seba]].
-I did not pay full price for them, nor anyone should as they are not worth more than $500 cad and that is due to the boot being carbon.
+I did not pay the total price for them, nor should anyone, as the carbon boot makes them worth less than $500 CAD.
 === Wheels used ===
-'''Best wheels so far [[Seba]] (non [[luminous]]), gyro at 85a and undercover at 88a'''.
+I have tried many wheels over the years. Below are some honourable mentions. The best wheels I have found are purposely not listed here.
-By order of performance and preference being 1 the best:
+By order of performance and preference being one the best:
-# 80/100/110 mm / xfirm wheels from a  brand that currently I am '''not''' listing here
+# 80/100/110 mm / xfirm wheels from a brand that currently I am '''not''' listing here.
+# Bont Avenger
 # MPC Black Magic 100~110 mm / xfirm
-# Matter F3 / 100mm
+# UnderCover Bullet 88a
+# Matter F3 / 100mm ''(unsure if it is original)''
+# Gyro FSK 80 mm
 Other past options:
-# Gyro FSK 80 mm / 86a. Undercover bullet 100 mm / 88a. [[Seba]] 80 mm / 85a.
+# Overall [[Seba]] 80 mm / 85a.
-# [[Seba]] Luminous 80 mm / 85a
+# [[Seba]] Luminous Glow
+# [[Seba]] Luminous 85a
 # [[Seba]] White 84 mm / 84a
 # [[Seba]] Street invaders 80 mm / 84a and [[Seba]] Slide Puyee florescent 80 mm / 90a
@@ Line 76: / Line 86: @@
 '''Fastest tested bearings so far are the Swiss ceramics and Twincam ILQ-X mr2'''.
-By order of performance and preference being 1 the best:
+By order of performance and preference being one the best:
 # Twincam 608 ILQ-X mr2 (RS), Cats 608 Red (RS) and Swiss 608 ceramics (hybrid) (RS)
+# Cats Lion Bearings
+# Swiss Hybrid Ceramics
 # Twincam 608 ILQ9 Pro (RS) and Twincam 608 ILQ11 SCRS
 # Wicked 608 ABEC9 (RS)
 # Wicked 608 ABEC7 (RS)
+Some that I have used but will gladly pass:
 # Twincam 608 ILQ7 classic (ZZ)
 # K2 608 ILQ5 (ZZ)
@@ Line 91: / Line 105: @@
 === SEBA Deluxe ===
-[[Seba]] Deluxe (v1 and v2) Black Frames Flat 165/180/195 mount is considered as one of the best frames on the market. It is stiffer, lighter and guarantees superior control, comfort, and outstanding power transfer. It is great for most demanding skating styles.
+[[Seba]] Deluxe (v1 and v2) Black Frames Flat 165/180/195 mount is considered one of the best frames on the market. It is stiffer and lighter and guarantees superior control, comfort, and outstanding power transfer. It is excellent for most demanding skating styles.
-The secret of the Deluxe frame is the tubular cross-braces. Cross braces are typically the weakest point in a frame, and the demands of slalom and freestyle skating can often lead them to crack. In the Deluxe frame, after extrusion, the cross braces each have a hole drilled town the length to turn them into tubes. These tubes are much stronger than the standard cross brace, and provide the frame with excellent stiffness and durability. The short lengths available are ideal for slalom, freestyle and dance skating disciplines.
+The secret of the Deluxe frame is the tubular cross-braces. Cross braces are typically the weakest point in a frame, and the demands of slalom and freestyle skating can often lead them to crack. In the Deluxe frame, the cross braces have a hole drilled down the length to turn them into tubes after extrusion. These tubes are much stronger than the standard cross brace, providing the frame with excellent stiffness and durability. The short lengths are ideal for slalom, freestyle and dance skating disciplines.
 Used sizes:
@@ Line 99: / Line 113: @@
 mm (90mm wheels), 243mm (80mm wheels)
   Mounting distances: 165mm, 180mm, and 195mm
-  Weights: 190g / 6.06oz – one 243mm frame no axles
+  Weights: 190g / 6.06oz – one 243mm frame, no axles
-  Aluminium 6000 series frame, cnc machined
+  Aluminum 6000 series frame, CNC machined
 === FR 300 ===
-The 300 Frame from FR comes in the well known design from [[Seba]]. With its length of 232 mm it offers a goof agility. It is milled out of a 7005 aluminum block and provides with its cut-outs a stylish look. Thanks to the hardness, it is extremely torsion-resistant and ensures optimum power transmission.
+The 300 Frame from FR is in the well-known design from [[Seba]]. With its length of 232 mm, it offers good agility. It is milled out of a 7005 aluminum block and provides a stylish look with its cutouts. Its hardness makes it highly torsion-resistant and ensures optimum power transmission.
   Used wheel size = 100mm
   length = 232mm
   Mounting = 150mm, 165mm and 180mm
-  Aluminium 7000 series frame, cnc machined
+  Aluminum 7000 series frame, CNC machined
 === Endless ===
 I bought the [[endless]] frame 4x 100mm / 3 x 110mm during 2021.
 # It is a frame designed for beginners and intermediate skaters and not advanced skaters
-# Although the lightest of it's kind for wizard skating, it is still one of the heaviest of all frames out there and on speed skating and marathons it's weight is felt as performance decreases.
+# Although the lightest of its kind for wizard skating, it is still one of the heaviest of all frames out there, and on speed skating and marathons, its weight is felt as performance decreases.
-# Not aerodynamic design which has negative effect on it's performance for speed and long distance which is heavily felt during windy days.
+# Not aerodynamic design harms its performance for speed and long distance, which is heavily felt during windy days.
-# Axle holes are both from the right side due to the frames being identical. You will have to remove the right boot if you want to change the wheels on the go.
+# Axle holes are both from the right side due to identical frames. You must remove the right boot to change the wheels on the go.
 === Powerslide ===
 During 2021 i bought the powerslide v-type II frame.
-This frame allows the same setup than an endless frame allows without the extra downsides as mentioned about the endless
+This frame allows the same setup as an endless frame without the extra downsides, as mentioned about the endless.
 However, it is not rockered.
 Setups: 4x100mm or 3x110mm
 == Skill level ==
@@ Line 138: / Line 151: @@
 == Skating style ==
-Long distance, speed, endurance, skating form, basic tricks, urban skating, city skating, ''speed human mosquito swatter''
+Long distance, speed, endurance, skating form, basic tricks, urban skating, city skating, ''speed human mosquito swatter.''
 == Environment ==
@@ Line 172: / Line 185: @@
 Reviews:
-# [https://youtube.com/c/NazarOnWheels Nazar On Wheels] Tech reviews (the guy is an engineer and he has skated with us in Toronto)
+# [https://youtube.com/c/NazarOnWheels Nazar On Wheels] Tech reviews (the guy is an engineer, and he has skated with us in Toronto)
 == Disapproved skaters ==
-# That narcissistic arrogant one from youtube who sold out and has a skating style comparable to a truckers mouth when a trucker speaks. Who also influences people in a bad and inadequate way with idiocies just to get a few more views.
+# That narcissistic, arrogant one from YouTube who sold out and has a skating style comparable to a trucker's mouth when a trucker speaks. Who also influences people in a bad and inadequate way with idiocies to get a few more views.
-# Anyone else that uses skating as a platform to bring identity politics and activism into the sport.
+# Anyone else who uses skating as a platform to bring identity politics and activism into the sport.
 == Links ==
 * [https://kommunity.com/@speedy Speedy on kommunity]
 * [https://meetup.com/bladers/members/285821118/profile/ Speedy on meetup]
-* [https://instagram.com/torontobladers Toronto Bladers on Instagram]
 * [https://strava.com/athletes/86773923 Speedy on Strava]
-* [https://youtube.com/channel/UC7Zj9qgcU8dHEmg8JyN0H9w/videos Toronto Bladers on youtube]
 [[category:skaters]]
 [[category:first aid]]
 [[category:team]]